Editing Routes; Selecting A Route For Editing - Raymarine E Series Reference Manual

81244_4.book Page 82 Thursday, January 31, 2008 1:53 PM
82

4.11 Editing routes

Once you have created a route, it can be edited in a variety of ways. You can:
• Reverse a route (see
• Amend the course of a route (see
• Change the name of a route (see
• Change the color of a route (see
• Erase a route (see
Note:
waypoint being edited becomes the target, then the system shall cancel the edit; the
waypoint shall remain in its original position.

Selecting a route for editing

For a route to be edited it must first be selected either via the route list or by selecting
the appropriate route on-screen.
... via the route list
You can now edit the route as described on
... with the cursor
You can now edit the route as described on
ROUTE DETAILS...
page 79
)
page 87
).
An active route can be edited, with the exception of the target waypoint. If a
REVIEW AND
ROUTES ...
EDIT ROUTES ...
Route 3
RTE
Move cursor over
required route
E-Series Networked Display Reference Manual
page 83
).
page 87
).
page 87
).
Highlight required route
page 83
.
REVIEW AND EDIT
THIS ROUTE
page 83
.
TIME
ETA HOURS
and/or
SOG
ACTUAL PLANNED
Toggle as required