Raymarine E Series Reference Manual page 37

81244_4.book Page 13 Thursday, January 31, 2008 1:53 PM
Chapter 2: General Operation
Editing the dialog box information
Dialog boxes enable data to be edited or entered into a list e.g. Edit Waypoint screen.
To edit/enter data into a dialog box:
1. Select the field for editing:
2. Edit/enter data and save:
3. Repeat Steps 1 and 2 if necessary.
Notes: (1) Character text can be entered in upper or lower case. (although the
e.g.
Symbol
Name
Waypoint 1
My Waypoints
Group
Comment
Highlight field to be edited
e.g. waypoint name
e.g.
Symbol
Name
Wa aypoint 1
My Waypoints
Group
Comment
To change
character or
selection, use:
To move to next
character for
editing, use:
system is not case sensitive e.g. WAYPOINT 1, Waypoint 1are con-
sidered to be the same name).
(2) If you need to use special or accented characters (e.g.
Extended Character Set should be switched to ON in the System
Setup Menu (see page 285).
EDIT NAME
OK
,
or
Turn
or
Press
13
~ ` ´),
the