Navigating To A Waypoint; Start Navigating To A Waypoint - Raymarine E Series Reference Manual

81244_4.book Page 38 Thursday, January 31, 2008 1:53 PM
38

3.4 Navigating to a waypoint

This section explains how to start and stop navigating to a waypoint. When you
navigate to a waypoint or to the cursor position, the data is sent on NMEA 0183 and
SeaTalk and can be used by an autopilot, if connected. For more information on
navigation, see

Start navigating to a waypoint

...using the cursor
To navigate to a waypoint using the cursor, when a chart or radar application is active:
...via the WPTS MOB button
To navigate to a waypoint using the WPTS/MOB button when any application is active:
WPTS/
MOB
.... by selecting the GOTO option
You can navigate to a waypoint using the GOTO option when a 2D or 3D chart
application is active and the top level chart soft keys are displayed:
GO TO ...
E-Series Networked Display Reference Manual
page 70
.
You can navigate to a waypoint using the cursor, via the
WPTS MOB button or by selecting the GOTO option.
Once navigation is active, the waypoint symbol is
surrounded by a box and a dashed line appears between
your boat and the waypoint.
If required you can display navigation details for the
active waypoint in the data bar (see
WPT
Position cursor over
waypoint to go to.
Waypoint List
GOTO WAYPOINT
OPTIONS ...
Select required waypoint
GOTO WAYPOINT
OPTIONS...
Or
GOTO CURSOR
page 281
GO TO WAYPOINT
GOTO WAYPOINT
Waypoint List
GOTO WAYPOINT
Select required waypoint
).