Setting Up The Menu - Uniden WDECT WDECT3315 Owner's Manual

SETTing up ThE MEnu

Entering the Menu
1) Press the /del key in standby mode.
2) Use /vol/ or /vol/
a desired main menu (DirectLink Mode, Room
Monitor, Handset Setup, Global Setup, and
System Reset).
3) Press to select the desired main menu.
4) Use /vol/ or /vol/
to enter.
In the submenu, use
to confirm your selection. For detailed instructions, see the following
sections for the desired submenu.
5) To exit the menu, press
DirectLink Mode
Entering the Two Way Communication between the
Handsets Anywhere without the Base
1) Enter the DirectLink Mode menu (see "Entering
the Menu" on page 11). To enter DirectLink mode
press [SELECT] appears.
2) Press to enter the DirectLink mode. You will hear a confirmation
tone, and DirectLink Mode Complete appears.
To adjust ringer volume, press
ringer volume (off, low, or high).
3) To return back to the normal mode, exit the DirectLink mode.
Press /del, and then
DirectLink Mode Cancel appears.
to move the pointer to
to select a desired submenu, and then press
/vol/ or /vol/ to select an item. Press
or return the handset to the cradle.
/vol/ or /vol/
, or return the handset to the cradle.
DirectLink Mode
Room Monitor
Handset Setup
To enter
DirectLink mode
press [SELECT]
to select one of three
To back to the
previous screen,
press /
del.
[ 11 ]