Uniden WDECT WDECT3315 Owner's Manual page 50

Symptom
Severe noise interference.
The Caller ID does not display.
Voice Message Indication
does not work.
You cannot register the
handset at the base.
The handset doesn't communicate • Remove the base ID (see "Replacing the Base Setting" on page 17)
with the other handsets.
An extra handset can't join
the conversation.
You cannot make an intercom
call with other handset.
If you still have a problem.
[ 46 ]
• Keep the handset away from microwave ovens, computers,
remote control toys, wireless microphones, alarm systems,
intercoms, room monitors, fluorescent lights, and electrical
appliances.
• Move to another location or turn off the source of interference.
• The handset was picked up before the second ring.
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID
service is current.
• Contact your local telephone company to make sure that your
telephone receives FSK message signaling.
• Please make sure your batteries are charged for 15-20 hours.
(see "Register the Handset" on page 39).
• Remove the base ID (see "Replacing the Base Setting" on page 17)
and register the handset (see "Register the Handset" on page 39).
and register the handset (see "Register the Handset" on page 39).
• Make sure that you have registered all handsets.
• Make sure there are not 2 handsets already using the 3-way
conference feature.
• Make sure that the receiving handset is not in use.
• Check our web site for the latest information and frequently
asked questions.
www.uniden.com.au
www.uniden.co.nz
Suggestion