Uniden WDECT WDECT3315 Owner's Manual page 21

System Reset
De-register the Handset
1) Enter the System Reset menu, and then the
Deregister HS submenu (see "Entering the Menu"
on page 11).
2) Press /vol/ or /vol/
ID to be de-registered from the list, and then press
. Deregister HS? appears.
3) Press /vol/ or /vol/
4) Press . You will hear a confirmation tone.
When de-registration is complete, Deregistration
Complete appears.
5) After de-registering the handset, move to "Replacing the Base Setting" below.
Replacing the Base Setting
1) Enter the System Reset menu, and then the
Replacing Base submenu (see "Entering the Menu"
on page 11). Replace base? appears.
2) Press /vol/ or /vol/
3) Press . You will hear a confirmation tone.
The base information will be deleted.
When replacing the base is complete, Place handset on main base to
register appears, register the handset to the new base (see page 39).
to select the handset
to select Yes.
to select Yes.
Which Handset?
Handset #1
Handset #2
Deregister HS?
Yes
No
Replace base?
Yes
No
Make sure to
perform the
Replacing Base
after de-register
the handset.
[ 17 ]