For detailed operation, refer to the owner’s manual supplied with the original unit. To purchase additional handsets (WDECT3305) contact your local Uniden Dealer or visit our web site at www.uniden.com.au or www. uniden.co.nz Checking the Package Contents Make sure you have received the following items in the package.
Connect the Charger Connect the AC adapter to the DC In 9V jack and to a standard AC wall outlet. set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward. Make sure the charge lED illuminates.
Place the handset in the charging cradle with the keypad facing forward. • Use only the Uniden battery (Bt- 446) supplied with your phone. replacement batteries are also available through the nearest Uniden dealer. (see page 1.) • recharge your handset on a regular basis by returning the handset to the charger after each phone call.
15-20 hours. Find the base model you wish to register the WDECT3305 handset to and follow the instructions for that model. • WDeCt3315 and WDeCt3355 series. Place the extra handset in the main base unit to begin registration...
Page 6
While the handset is registering, ‘Handset Registering’ will appear in the lCD. When ‘Registration Complete’ is displayed, the handset has been registered to the base. If ‘Registration Failed’ appears, please try these steps again. • The handset can be registered when the main base is in standby mode.
(D) repaired by someone other than an authorized Uniden repair Agent for a defect or malfunction covered by this warranty, (E) Used in conjunction with any equipment or parts or as part of a system not manufactured by Uniden, (F) Where the serial number label of the product has been removed or damaged beyond recognition.