12. Press the Enter button to save the setting.
13. Press the Pause button to exit SelecType mode.
Selecting the registered settings
To select the registered settings, follow the steps below.
1. In SelecType mode, press the SelecType button until PAPER
CONFIG. MENU appears on the LCD panel.
2. Press the Item button. You may see PAPER NUMBER=1*.
3. Press the + or - button to select the registered number that you
want to use. Then press the Enter button.
4. Press the Pause button to exit SelecType mode.
Printing a status sheet
In SelecType mode, a status sheet can be printed to see the current
SelecType default values.
1. Load paper as described in "Using Roll Paper" on page 4-3 or
"Using Cut Sheet Media" on page 4-15.
2. In SelecType mode, press the SelecType button until TEST
PRINT MENU is displayed.
3. Press the Item button until STATUS CHECK = PRINT is
displayed.
4. Press the Enter button.
A status sheet is printed. After printing, the printer exits
SelecType mode and returns to READY status.
The Control Panel
1-21