Buttons, Lights and Messages
The control panel of the printer consists of 8 buttons, 12 lights,
and a 20-character liquid crystal display (LCD). The control panel
layout is shown below.
Buttons
Power
Cleaning
3 Sec.
Pause
(Reset 3 Sec.)
1-2
The Control Panel
Turns the printer on and off. Turn off the printer, then
press this button while pressing and holding the
Pause button to enter the maintenance mode. See
"Maintenance Mode" on page -23.
Print head cleaning is performed when pressed for
3 seconds. Before cleaning, make sure that thick
paper is not loaded in the printer.
Stops printing temporarily. Press a second time to
resume printing.
Clears print data in the printer memory if pressed
and held for 3 seconds.
When pressed in SelecType mode, the printer
returns to READY status.