System Reset; De-Register The Handset - Uniden WDECT3355 Owner's Manual

System reset

De-register the Handset

1) Enter the System Reset menu, and then the
Deregister HS submenu (see "Entering the Menu"
on page 13).
2) Press /vol/ or /vol/
ID to be de-registered from the list, and then press
. Deregister HS? appears.
3) Press /vol/ or /vol/
4) Press . You will hear a confirmation tone.
When de-registration is complete, Deregistration
Complete appears.
5) After de-registering the handset, move to "Replacing the Base Setting" below.
replacing the Base Setting
1) Enter the System Reset menu, and then the
Replacing Base submenu (see "Entering the Menu"
on page 13). Replace base? appears.
2) Press /vol/ or /vol/
3) Press . You will hear a confirmation tone.
The base information will be deleted.
When replacing the base is complete, Place handset on main base to
register appears, register the handset to the new base (see page 56).
Which Handset?
Handset
to select the handset Handset
Deregister HS?
to select Yes.
Yes
No
Replace base?
Yes
to select Yes. No
#1
Make sure to
#2
perform the
Replacing Base
after de-register
the handset.
[ 20 ]