Uniden WDECT3355 Owner's Manual page 66

Symptom
Severe noise interference.
The Caller ID does not display. • The handset was picked up before the second ring.
You cannot register the
handset at the base.
The handset doesn't
communicate with
another handsets.
An extra handset can't join
the conversation.
The handset or the base can't • Make sure that more than 2 handsets are not in use.
join the conversation
The answering system does
not work.
[ 63 ]
• Keep the handset away from microwave ovens, computers,
remote control toys, wireless microphones, alarm systems,
intercoms, room monitors, fluorescent lights, and electrical
appliances.
• Move to another location or turn off the source of interference.
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID service is
current.
• Charge the battery pack for 15-20 hours.
• Remove the base ID (see "Replacing the Base Setting" on page
20) and register the handset (see "Register the Handset" on
page 56).
• Remove the base ID (see "Replacing the Base Setting" on page
20) and register the handset (see "Register the Handset"
on page 56).
• Make sure that you have registered all handsets.
• Make sure there are not 2 handsets already using the 3-way
conference feature.
• When recording a conversation, the 2nd handset (or the base)
cannot join the conversation.
• Make sure the AC adapter is plugged in.
• Make sure that the answering system is turned on.
• Make sure that the message record time is not set to Announce
only (see page 46).
Suggestion