Setting Up Your Answering System; Setting The Clock - Uniden EXR 2480 Owner's Manual

Press and hold
skip/
or to scroll
repeat/
through days, hours,
minutes, etc.
If you do not press a next
key within 15 seconds, the
system returns to standby.

Setting up your answering system

Turning the answering system on/off

Setting the clock

The clock on EXR 2480 Answer System starts when power is applied
to the base. Follow these steps to set the clock to the correct time.
repeat/
4
Press skip/
time setting. Numbers 0 through 59 display on the base as
each minute is announced. Press
correct time.
5
The LED displays A or P. Press
until you hear the correct AM/PM setting.
6
Press clock again to end the time/day setting.
The EXR 2480 announces the time that you have set.
1
To turn the answering system on,
press
answer on/off
greeting message is played and a
tone will sound.
2
To turn the answering system off,
press
answer on/off
1
Press and hold
sounds.
2
First, press
skip/
until the correct day of the week is
announced. (Number 0 through 6
displays on the base as each day is
announced.) Press
select the day.
3
Next, press
until you hear the correct hour
setting. Numbers 1 through 12
display on the base as each hour is
announced. Press
select the correct hour.
repeat/
or until you hear the correct
clock
skip/
. The current
again.
until a tone
clock
or
repeat/
again to
clock
or
skip/ repeat/
again to
clock
again to select the
or repeat/
39