Table of Contents
Advertisement
To stop playing your
messages, press
again.
play/stop
Pressing
repeat/
before 2 seconds
(4 seconds from remote)
of the message has played
causes the system to scan
back one message.
If you have several
messages, press
until you
repeat/
return to the message you
want to replay.
Using your answering system
Playing your message
The base LED shows the number of total messages on the
display. If the display is blinking, then there are new messages
waiting for you. The EXR 2480 is designed to play your new
messages first. After you play your new messages you can then
play your old messages.
Repeating a message
1
play/stop
Press
announces the number of new and
old messages, then the incoming
messages are played. The time and
day each message was received is
announced after the message is
played.
2
When all new messages have
played, a long tone is heard. The
message counter LED stops flashing
to indicate that all of the new
messages have been reviewed.
3
After you have reviewed all your
messages, you can play your old
messages again. Press
and follow the instructions above.
1
Press
play/stop
message. The number of stored
messages is announced.
2
After a message has played for a few
seconds, press
the message.
3
Press
play/stop
reviewing messages and return to
standby. The message counter LED
shows the total number of messages
still on the system.
. The system
play/stop
to review your
to repeat
repeat/
at any time to stop
43
Advertisement
Table of Contents
