Setting Up Your Answering System; Setting The Clock - Uniden EXLA8950 Owner's Manual

Press or
multiple times to scroll
through days, hours,
minutes, etc.
If you don't set the clock
within two minutes, the
system returns to standby.

Setting up your answering system

Turning the answering system on/off

Setting the clock

The clock on EXLA 8950 Answer System starts when power is
applied to the base. Follow these steps to set the clock to the
correct time.
4
Press or
Numbers 1 through 59 display on the base as each minute is
announced. Press
5
The LED displays an A or P. Press
hear the correct AM/PM setting.
6
Press again to end the time/day setting.
clock
The EXLA 8950 announces the time that you have set.
1
To turn the answering system on,
press answer on/off
will sound after the press, greeting
message is played.
2
To turn the answering system off,
press answer on/off
The EXLA 8950 announces that the
answering system turned off.
1
Press and hold
tone sounds.
2
First, press
correct day of the week is
announced. (Number zero through
six displays on the base as each day
is announced.) Press
to select the day.
3
Next, press
hear the correct hour setting.
Numbers 1 through 12 display on
the base as each hour is announced.
Press again to select the
clock
correct time.
until you hear the correct time setting.
again to select the correct time.
clock
. A beep tone
again.
until a beep
clock
or until the
again
clock
or until you
or until you
26