Mounting The Base Unit On A Wall - Uniden EXR 2480 Owner's Manual

Mounting the base unit on a wall

Standard wall plate mounting
This phone can be mounted on any standard telephone wall
plate.
1
2 - 7
6
Wall plate
7
3
7
4
5
AC adapter
AC outlet
1
Snap the desktop/wall
mount adapter into
the bottom of base as
shown.
2
Plug the telephone
line cord to the
TEL LINE jack and the
AC adapter to the
DC IN 10V jack.
3
Plug the telephone
line cord into the
telephone outlet.
2
4
Wrap the AC adapter
cord inside the
molded wiring
channel. Then wrap
the cord around the
strain relief notch.
5
Plug the AC adapter
into a standard
120V AC wall outlet.
6
Raise the antenna to a
vertical position.
7
Align the mounting
slots on the base. with
the mounting posts on
the wall. Push in and
down until the phone
is firmly seated.
7