Changing The Digital Security Code; Headset Installation - Uniden EXR 2480 Owner's Manual

If the handset battery pack
is completely discharged
or the battery pack is
removed, the digital
security code will be lost.
If this happens, a new
security code is set
automatically next time
the battery pack is
charged.
48

Changing the digital security code

The digital security code is an identification code used to connect
the handset and the base unit. Normally, setting the code is not
necessary.
The first time you charge your handset, the security code is
automatically set.
In the rare situation that you suspect another cordless telephone
is using the same security code, you can change the code.

Headset installation

Your phone may be used with
an optional headset. To use
this feature, simply plug any
standard 2.5mm headset plug
into the headset jack. Your
phone is ready for hands-free
conversation.
1
Remove the handset from the base
unit. Press and hold
2
While the handset is emitting the
paging sound, place the handset on
the base unit holding
The paging tone stops.
Leave the handset on the base
longer than 5 seconds. A random,
new security code is set.
headset
jack
.
page/int'com
.
page/int'com