Connect The Base Unit - Uniden EXR 2480 Owner's Manual

Place the power cord so it
does not create a trip
hazard, or where it could
become chafed and create
a fire or electrical hazard.

Connect the base unit

If you want to install the base unit on the wall, see page 7.
3
To AC outlet
AC adapter
2
(supplied)
To telephone outlet
Telephone line cord
(supplied)
1
Snap the desktop/wall mount
adapter into the top of the
base as shown.
2
Connect the telephone line cord to the TEL LINE jack and to
a telephone outlet.
3
Connect the AC adapter to the DC IN 10V jack and to a
standard 120V AC wall outlet.
4
Set the base unit on a desk or
tabletop and place the handset
on the base unit.
Then raise the antenna to a
vertical position.
To DC IN 10V
To TEL LINE
Route the
AC adapter cord
5