Setting the Message Alert tone
Message Alert feature lets you know you have new messages by sounding a short
beeping tone. If you set the Message Alert to On and when a new message is
received, the alert tone will sound every 15 seconds.
1) Press the menu/clock key five times in standby mode.
2) Press the volume/select/
3) Press the set/ringer key to select the new setting. You hear a confirmation tone,
Turning the Message Alert tone Off by pressing any key:
1) To quickly turn Message Alert tone off, press any key on the base unit and the
Turning Message Alert tone Off when you're away from your phone:
1) When all new messages are played back using the remote playback feature (see
[ 46 ]
T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E
You hear "Message alert" and the current setting ([
or [
] On), and it is displayed on the base. Then you hear the guidance for
setting the Message Alert.
then the announcement "Message alert" followed by the current setting you have
selected is announced. After a few seconds, the system announces "To set
language, press menu again". When the first new message is received, the alert
tone will begin to sound.
tone will automatically deactivate. To reset, go back into the menu setup mode
(steps 1 - 3 above.)
page 54), the Message Alert tone will automatically deactivate. The tone will not
deactivate until all messages are played back.
or volume/select/
] Off
key to make your selection.
www.uniden.com