Uniden EXAI978 Series Owner's Manual page 11

4) Place the battery case cover back on the handset by sliding
it upwards until it clicks into place.
5) Place the handset on the base unit face forward for 15-20
hours without interruption. The base unit's LED light
(labeled as charge/in use) illuminates once the handset is
placed on the base. The LED light will illuminate regardless
if the battery pack is connected or not.
If the base charge/in use LED light does not illuminate:
• Check to see if the AC adapter is plugged into the base
unit and the electrical wall outlet properly. (Use only the
supplied AC adapter. Do not use any other AC adapter.)
• Check to see if the handset is sitting correctly on the
base and making good contact with the base unit's
charging contacts.
www.uniden.com
• Replacement batteries
are also available
through the Uniden
Parts Department at
(800) 554-3988,
Monday through Friday
from 8:00 a.m. to
5:00 p.m. or online at
www.uniden.com
• The handset should
always sit in charging
cradle face forward to
make good contact
with base unit's
charge contacts.
G E T T I N G S T A R T E D [ 11 ]