Uniden EXAI978 Series Owner's Manual page 13

Uniden cordless telephone owner's manual
Hide thumbs Also See for EXAI978 Series:
Table of Contents

Advertisement

C. Connect the base unit
1) Connect the AC adapter to the DC IN 9V jack
and to a standard 120V AC wall outlet.
2) Set the base on a desk or tabletop, and
place the handset on the base unit.
3) Make sure that the charge/in use LED illuminates.
If the LED does not illuminate, check to see that the AC adapter is plugged in
and that the handset makes good contact with the base charging contacts.
• Connect the AC adapter to a continuous power supply.
• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.
• After installing the battery pack in the handset, charge your handset at least 15-20
hours before plugging into the phone line. Once the handset battery pack is fully
charged, connect the telephone line cord to the base and telephone wall outlet.
4) Connect the telephone line cord to the TEL LINE jack and
to a telephone outlet once the handset is fully charged.
If your telephone outlet isn't modular,
contact your telephone company
for assistance.
www.uniden.com
Route the cord.
Route the cor
Route the cord. d.
Modular
Use only the supplied
AD-314 AC adapter.
Do not use any other
AC adapter.
Place the power cord so
that it does not create
a trip hazard or where
it could become chafed
and create a fire or
electrical hazard.
G E T T I N G S T A R T E D
[ 13 ]

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Exai978iExai 978 series

Table of Contents