7) Press the set/ringer key to select the minute.
8) Press the volume/select/
AM or PM setting. The message counter displays [
9) Press the set/ringer key to select the AM/PM setting.
You hear a confirmation tone, then the announcement "Time" and the time and day
are announced for your review. After a few seconds, the system announces "To set
security code, press menu again".
Setting a Personal Security Code (PIN)
To play your messages from a remote location, you need to enter a two-digit
Personal Identification Number (PIN) code (01-99). To select a PIN, perform the
following steps:
1) Press the menu/clock key twice in standby mode.
The system announces "Security code", and the current PIN code is announced as
it is displayed on the base. Then the system announces the guidance for setting
the PIN code.
2) Press the volume/select/
appears.
3) Press the set/ringer key to select the PIN code. You hear a confirmation tone,
then the announcement "Security code" followed by the new PIN code is
announced. After a few seconds, the system announces "To set ring time, press
menu again".
www.uniden.com
or volume/select/
key until you hear the correct
or volume/select/
key until the desired number
T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E
] or [
].
The PIN code is set to
"80" when you purchase
the cordless phone.
[ 43 ]