Uniden EXAI978 Series Owner's Manual page 42

• Normally, the system
will return to standby
if it remains idle for
10 seconds after the
volume/select/ or
key
volume/select/
is pressed. For setting
the time, however, the
idle time is extended
to two minutes.
• Press and hold the
volume/select/ or
volume/select/ key
to quickly scroll
through the numbers
on the display.
[ 42 ] T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E
Setting the Time
The clock on the cordless phone's answering system starts when power is supplied to
the base. Follow these steps to set the clock to the correct time.
delete play/stop
charge
repeat repeat skip skip
in use
find hs answer on/off
memo rec greeting
mic menu/clock set/ringer
volume /select
1) Press the menu/clock key in standby mode.
The system announces "Time", the current time and
the guidance for setting the time.
2) Press the volume/select/
key until the correct day is announced. The numbers
[ ] through [ ] are displayed on the base.
3) Press the set/ringer key to select the day.
4) Press the volume/select/
key until you hear the correct hour setting.
The numbers [ ] through [
base as each hour is announced.
5) Press the set/ringer key to select the hour.
6) Press the volume/select/
key until you hear the correct minute setting.
The numbers [ ] through [
the base as each minute is announced.
or volume/select/
or volume/select/
] are displayed on the
or volume/select/
] are displayed on
www.uniden.com