1) When the phone is in standby mode, press and hold the
2) Press the vol/
3) Press the select key to toggle between
4) Press the end key or return the handset to the base unit to complete the setting.
• If you are not sure of your dialing system, set for tone dialing and make a trial call.
• If your phone system requires pulse dialing and you need to send the DTMF tones for
Setting the language
1) When the phone is in standby mode, Press and hold the
2) Press the vol/
There are three
3) Press the select key to toggle
languages to choose
from; English, French
and Spanish.
4) Press the end key or return the handset to the base unit to complete the setting.
[ 18 ]
G E T T I N G S T A R T E D
caller id/menu key. The following screen appears.
/
each setting.
The handset returns to standby mode.
If the call connects, leave the setting as is. Otherwise, set for pulse dialing.
certain situations during a call, you may "Switch Over" to tone dialing. (Refer to
"Tone Dialing Switch Over" on page 21.)
caller id/menu key. The following screen appears.
/
(Spanish) for each setting.
The handset returns to standby mode.
key three times to select
key four times to select
(English),
.
and
for
.
(French) or
www.uniden.com