Table of Contents
Advertisement
2
Installation and Use
Connect the Workstation PC to the Mobile Micro GC
Connect the Workstation PC to the Mobile Micro GC
The external device connection ports on the Mobile Micro GC are located at the left side of the
internal cover (See
(LAN), and multiconnector.
The Mobile Micro GC requires an Agilent chromatography data system (CDS) for control, peak
identification, integration, data analysis, reporting, and so forth. The CDS requires a LAN (Ethernet)
connection or Wi-Fi. Multiple Micro GCs can be controlled using an Agilent data system such as
OpenLAB EZChrom, OpenLAB Chemstation, or OpenLAB 2.x. The maximum number of Micro GCs
controlled is limited by your software license. For detailed information on setting method
parameters, see the help files in the data system. For more information about the Ethernet
connection between the Workstation PC and the Micro GC, see the "Communication" chapter in
the Agilent 990 Micro GC User Manual (p/n G3588-90010).
Agilent 990 Mobile Micro GC User Manual
Figure 5
on page 13). from left to right, are RS-232 (COM-1), USB, Ethernet
23
Advertisement
Table of Contents
