Uniden DXAI 5188-2 Series Owner's Manual page 60

Symptom
Unavailable message is
displayed on the LCD
screen of the handset.
The handset doesn't
communicate with the main
base or the other handset.
No 3-way conversation.
The answering system does
not work.
The answering system does
not record any messages.
Messages are incomplete.
[ 60 ] A D D I T I O N A L I N F O R M A T I O N
• Make sure the other handset is not already in use. Both handsets cannot be in
talk mode at the same time.
• Place the handset in the main base for at least 5 seconds to re-register to the
main base.
• Make sure the handset is not too far from the main base when trying to use.
• Re-register both handsets (see page 14).
• Only one handset at a time can talk with an outside caller. To allow the other
handset to talk to the caller, transfer the call.
• Make sure the the AC adapter is plugged into the base and wall outlet.
• Make sure the answering system is turned on.
• Set the record time to either the one minute or four minute option.
• The memory may be full. Delete some or all of the saved messages.
• The incoming messages may be too long. Remind callers to leave a brief message.
• The memory may be full. Delete some or all of the saved messages.
Suggestion
www.uniden.com