Uniden DXAI 5188-2 Series Owner's Manual page 10

Use only the supplied AD-
314 AC adapter for the
main base and AD-310 for
the charging cradle. Do
not use any other AC
adapter.
[ 10 ] G E T T I N G S T A R T E D
C. Connect the main base unit and charging cradle
1) Connect each AC adapter to the DC IN 9V
jack and to each standard 120V AC wall
outlet.
2) Place one handset in the main base unit
and the other in the charging cradle.
3) Make sure that the charge/in use and
charge LED illuminate. If the LED does
not illuminate, check to see that the AC
adapter is plugged in and that the
handset makes good contact with the
cradle's charging contacts.
4) Place the handset in the main base unit and one
handset in the charging cradle for 15-20 hours without
interruption. The main base or charging cradle unit's
LED light (labeled charge/in use or charge)
illuminates once the handset is placed in the main
base or charging cradle. The LED light will illuminate
whether the battery pack is connected or not.
www.uniden.com