Uniden DXAI 5188-2 Series Owner's Manual page 18

• If you are not sure of
your dialing system,
set for tone dialing
and make a trial call.
If the call connects,
leave the setting as is.
Otherwise, set for
pulse dialing.
• If your phone system
requires pulse dialing
and you need to send
the DTMF tones during
a call, you can
temporarily switch over
to tone dialing. (Refer
to "Tone Dialing Switch
Over" on page 21.)
[ 18 ] G E T T I N G S T A R T E D
1) Be sure you are using handset 1. Handset 1 shows
phone is charging.
2) When the phone is in standby mode, press and hold
call id/menu. The following screen appears.
3) Press vol/ / three times to select
4) Press select/channel to set the phone to
5) Press end and return the handset to the main base unit to complete the setting.
The handset returns to standby mode.
Setting the language
There are three languages to choose from; English, French and Spanish.
1) When the phone is in standby mode, press and hold
call id/menu. The following screen appears.
2) Use vol/ / to move the pointer to
3) Press select/channel to select
4) Press end or return the handset to the main base unit or charging cradle to
complete the setting. The handset returns to standby mode.
in its display while the
.
dialing.
.
, or .
www.uniden.com