Weak Or Hard To Hear Audio; Noise Or Static On The Line - Uniden DECT4086-2 User Manual

Dect4086 series
Hide thumbs Also See for DECT4086-2:
Table of Contents

Advertisement

If...
I can't hear the base
speaker.
Messages are
incomplete.
The system keeps
recording if I answer
on an extension.
I can't register a
handset.
My alarm rings at
the wrong time.
My alarm won't ring
on the right day(s).

Weak or Hard To Hear Audio

If a caller's voice sounds weak or soft, the signal might be blocked by
large metal objects or walls; you might also be too far from the base,
or the handset's battery may be weak.
Try moving around while you're on a call or moving closer to the
base to see if the sound gets louder.
Make sure the handset's battery is fully charged.
Try adjusting the earpiece volume.

Noise or Static on The line

oise or Static on The line
Interference is the most common cause of noise or static on a
cordless phone. Here are some common sources of interference:
electrical appliances, especially microwave ovens
computer equipment, especially wireless LAN equipment and DSL
modems

Try...
-
Making sure call screening is turned on (see page
36).
-
Changing the base speaker volume.
-
The incoming messages may be too long. Remind
callers to leave a brief message.
-
Deleting messages (the memory may be full).
-
You may have to change the line mode. Contact
customer service for more information.
-
Seeing if there are 10 handsets registered to this
base.
-
Resetting the handset.
-
Making sure the time is set correctly (see page 18).
-
Making sure the days are selected (see page 32).
-
Making sure the date is set correctly (see page 18).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dect4086Dect4086-6Dect4086-4Dect4086-5Dect4086-3

Table of Contents