Uniden DECT4086-2 User Manual page 29

Edit
Number1
Edit
Number2
Personal
Ring
selection
Speed Dial
Editing an existing entry
1. With the station in standby, open the phonebook and find the entry you
want.
2. Press
opTIoNs
choose Edit.
3. Highlight the individual
item you want to
change and press
. The phone
seLeCT
goes to the edit screen
for that item.
4. Edit the item as
described under "Creating a new entry" (above), and press
OR press
5. Highlight the next item you want to edit and press
you're finished editing this entry, press
Enter the primary number (up to 32 digits) for this entry
exactly the way you would dial it.
-
If you need the phone to wait before sending the next set of
digits, press
rEDIAl/PAUSE
-
If two seconds isn't long enough, you can enter as many
pauses as you want.
-
Each pause counts as one digit (you'll see a P in the number).
Enter the secondary number for this entry just like you did the
primary number.
(Handset only) Choose the ring tone you want the handset to
use when this person calls. As you highlight each ring tone,
the handset sounds a sample of that tone.
Select the speed dial number (SPD0 through SPD9) you want
to assign to this entry.
-
The speed dial numbers correspond to the numbers (0
through 9) on the twelve key dial pad.
-
Each speed dial number can be assigned to only one entry.
-
If the speed dial number is already assigned, the phone
shows the name of the entry assigned to the number. If
you want to change it, select the number, and the phone
overwrites the existing assignment.
, then
to cancel editing and return to the main entry.
BaCk
to enter a two-second pause.
Edit Edit
Bob Smith Bob Smith
987-555-1234 987-555-1234
123-555-9876 123-555-9876
Clatter Clatter
Speed Dial 4 Speed Dial 4
BACK BACK SELECT SELECT
Edit Name Edit Name
Personal ring (handset Personal ring (handset
SAVE SAVE
seLeCT
.
save
Edit Number1 Edit Number1
Edit Number2 Edit Number2
only) only)
Edit Edit
Speed Speed
Dial Dial
.
ok
. If