Uniden DECT4086-2 User Manual page 4

Connect the power and telephone cords
1. Connect the base AC adapter to the
cord as shown:
For desktop use
2. Connect the included two-line telephone cord to the
jack. If your phone company uses a
separate phone jack for each line,
connect a standard telephone cord to
the
TeL LINe 2
as shown above.
3. Connect the cord from
a two-line phone jack.
OR
If your phone company uses a
separate phone jack for each line,
connect the cord from
the jack for line 1; then, connect the cord from
for line 2.
4. Plug the AC adapter into a standard 120 V AC power outlet.

A C I
N
7 . 8 V
T E L
L I N E
1 / 2
T E L
L I N E
2
jack. Route the cords
TEl lINE 1/2
TEl lINE 1/2
AC IN 7.8V
For wall mount use
Connect the Connect the
to
telephone cord telephone cord
here rst. here rst.
IF you have a separate IF you have a separate
jack for line 2, connect jack for line 2, connect
another phone cord here. another phone cord here.
to
jack and route the
A C I
N
7 . 8 V
T E L
L I N E
1 / 2
T E L
L I N E
2
TEl lINE 1/2
A C I A C I
N N
7 . 8 V 7 . 8 V
T E L T E L
L I N E L I N E
1 / 2 1 / 2
T E L T E L
the jack
TeL LINe 2
L I N E L I N E
2 2