Changing from Tone to Pulse Dialing
Phones can communicate with the telephone network in two ways:
tone (DTMF) or pulse dialing. If you know your phone company uses
pulse dialing or the test call for line 1 did not work, follow these steps:
1.
With the phone in standby, press
2.
Use
or
up
3.
When your phone prompts you to select a line, press
4.
Use
or
up
5.
Highlight Pulse, then press
tone. Try making another test call using line 1.
If your test call on line 2 did not connect, follow the same
process, but press
If you use pulse dialing and you need to send DTMF tones during a
call (if you're using an automated response system, for example),
press
to temporarily switch to tone dialing. When the call ends, the
phone automatically returns to pulse dialing mode.
to highlight Global Setup, then press
DowN
to highlight Dial Mode, then press
DowN
LINe2
MeNu
. The phone sounds a confirmation
ok
in step 3.
.
ok
.
ok
.
LINe1
.