Screening.calls; Turning.off.the.message.alert.tone; You.are.away.from.home; Setting.a.security.code.or - Uniden DECT1580 User Manual

Screening Calls
From the base
• While.the.system.is.taking.the.message,.
simply.listen.to.the.caller.over.the.base.
speaker..(You.need.to.activate.the.base.call.
screen.feature.in.advance..See.page.46.).
• To.mute.the.call.screen.and.allow.the.caller.
to.continue.leaving.the.message,.press.
Turning Off the Message Alert Tone
When.all.new.messages.are.played.back,.the.message.alert.tone.will.automatically.deactivate..The.tone.will.not.
deactivate.until.all.new.messages.are.played.back..To.quickly.turn.off.the.tone,.press.any.key.on.the.base.
Operating the Answering System While You Are Away from Home
When.you.are.away.from.home,.you.can.operate.your.answering.system.with.any.touch-tone.telephone.
Setting a security code or Personal Identification Number (PIN)
To.operate.your.answering.system.when.you.are.away.from.home,.you.will.need.to.enter.a.two-digit.security.code.or.
Personal Identification Number (PIN). The default security code is 80.
1) Press.MENU/SELECT..
) Select.the.Ans. Setup.menu,.and.then.the.Security Code.submenu.
3) Use.the.number.keypad.(0.through.9).to.enter.a.two-digit.security.code.(01-99).
4) Press.MENU/SELECT. You will hear a confirmation tone.
Dialing in to your answering system
Note:. If.you.enter.an.incorrect.security.code/PIN.three.times,.you.will.hear.a.beep.and.the.answering.system.will.
return.to.standby.
From the handset
• While.the.systems.is.recording.the.message,.press..
/MUTE..If.another.handset.is.screening.a.call,.you.will.hear.
a.beep.and.you.will.not.be.able.to.screen.the.call.
• To.answer.the.call.and.speak.to.the.caller,.press.TALK/
FLASH.
. • To.mute.the.call.screen.and.allow.the.caller.to.continue.leaving.
the.message,.press.END.or.return.the.handset.to.the.cradle.
50