Using Your Router; Using The Lan Ip Setup - Belkin N150 User Manual

USING YOUR ROUTER

Using the LAN IP Setup

The "LAN Settings" page allows changing the
Router's LAN IP address as required and configuring
Dynamic Host Configuration Protocol (DHCP).
Configuring Parameters of LAN IP Setup
LAN IP setup parameters are advanced settings that you may require
if you are a network administrator or your network requires a different
IP addressing scheme. The Router is shipped with the default IP
address on the LAN side and with the DHCP server enabled.
Note: If you change the default LAN IP address, you
must use the new LAN IP address to log in.
Setup steps:
Open a Web browser on the computer.
In the address bar of the Web browser, type http://192.168.2.1.
Click "Login" in the upper right corner of the page. The Router
does not ship with a password, so just click "Submit".
Click on "LAN Settings" in the left column
under the "LAN Setup" heading.
13