Belkin N150 User Manual page 22

USING YOUR ROUTER
Configure the parameters below.
PPTP Account and PPTP Password: Enter the PPTP account and
password provided by the ISP. The PPTP account and password are
used to log in to the ISP server.
Retype Password: Enter the password again.
Host Name: (Optional) Enter the host name.
Service Address: Enter the IP address of the ISP server.
IP Address Assignment: You can select either to dynamically get an IP
address from the ISP or to use a static IP address. If you select "Use
Static IP Address", manually enter the IP address, the subnet mask, and
the default gateway.
If you select the "Disconnect after xxx minutes of no
activity" check box and specify a time interval, the system
interrupts the Internet connection when there is no
Internet access behavior within the specified time.
20