Belkin N150 User Manual page 19

Hide thumbs Also See for N150:

Table of Contents

USING YOUR ROUTER

If after a few minutes your Internet Status says

"Connected", you're done! You can surf the Internet.

Static Connection

Select Static IP if your ISP provides the IP address, subnet

mask, and information about the gateway and DNS server.

Setup steps:

Click "Connection Type" in the left column

under the "Internet WAN" heading.

Select "Static" in the "Connection Type" page that appears.

Configure the parameters below. These parameters cannot be left

blank.

IP Address: Enter the WAN IP address provided by the ISP. The

parameter must be entered.

Subnet Mask: Enter the WAN subnet mask provided by the ISP. It varies

with the network type. It is usually 255.255.255.0 (Class C).

ISP Gateway Address: Enter the IP address of the gateway provided by

the ISP. It is the IP address used for connecting to the ISP.

Table of Contents