Getting To Know Your Router; Front Panel - Belkin F9K1103 User Manual

GETTING TO KNOW YOUR ROUTER

Front panel

A
B
a) router status light
Your Router's status is shown by the light on the front .
off: The Router is not plugged into a power source .
blinking blue: The Router is starting up .
solid blue: The Router is connected to the Internet .
solid amber: The modem is detected but the
router is not connected to the internet .
blinking amber: The Router can't detect the modem . Either the
modem is off, is not plugged into the Router, or is unresponsive .
b) Wi-Fi protected setup (Wps) light and button
The WPS button on the front of your Router can be used to
help establish a secure connection between your Router and
other WPS-enabled Wi-Fi devices such as computers . To use
the WPS feature on your Router, see "Getting Started > Adding
Computers to Your Network > Using the WPS Button" .
The small light near the WPS button shows what is happening
while you are using WPS to establish a connection .
off: Idle
blinking blue: The Router is listening for a WPS-
enabled computer or other device .
solid blue: The Router has made a secure
connection with the computer or other device .
amber: A connection was not created .
18