Setting Up The Answering System; Using The Answering System Setup Menus; Recording A Personal Greeting - Uniden 6035 + 1 Owner's Manual

Setting Up the Answering System

Using the Answering System Setup Menus

Your handset controls all of the answering system setup options except for the personal greeting (personal greetings
must be changed directly at the base). Here are some hints on using your handset to access your answering system:
• If you have multiple bases, select the base with answering system you want to access (see page 21).
• When the phone is in standby, press
ANSWERING MACHINE OPERATION appears on the handset display, and the system announces the number of
new and old messages.
• After the fi rst announcement, you have thirty seconds to enter your fi rst command before the system returns to
standby.
• If you receive a call, remote operation is cancelled.
• If another handset makes a call, remote operation is cancelled.
• During remote operation " - -" appears on the base.

Recording a Personal Greeting

Your answering system comes with a pre-recorded outgoing message or greeting that plays when you receive a
call: "Hello, no one is available to take your call. Please leave a message after the tone." You can record your own
personal outgoing greeting. Your recorded greeting must be between two seconds and thirty seconds long.
1) On the base, press and hold
2) The system announces, "Record greeting." Begin recording after the announcement.
The message counter LED displays "- -", and then begins to count down thirty seconds.
3) When you fi nish recording, press
recorded greeting plays back for you.
DECT6035, 6035+1 OM.indb 38 DECT6035, 6035+1 OM.indb 38
[ /Mute] on the handset to access the answering system. REMOTE
[greet].
[greet] again or press [
38
]. You will hear a confi rmation tone, and your
8/8/07 3:25:45 PM 8/8/07 3:25:45 PM