Expanding Your Phone; Adding Accessory Handsets - Uniden 6035 + 1 Owner's Manual

Expanding Your Phone

Adding Accessory Handsets

Your phone supports a total of six cordless handsets. You can now place a fully-featured cordless handset anywhere
AC power is available to connect the handset charger. All the handsets ring when a call is received.
Compatible Handsets
Your phone is compatible with the DECT 6005. If you purchased an accessory handset separately, you must register
the handset to the base before use. Accessory handsets will not operate until they are registered.
Charging Accessory Handsets
The handset's battery recharges automatically when the handset is placed in the charger.
1) Use the supplied AC adapter (AAD-600S) to connect the DC IN
9V jack to a standard 240V AC outlet.
2) Set the charger on a desk or tabletop, and place the handset in
the charger with the LCD screen facing forward.
3) Make sure that the charge LED illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and
the handset makes good contact with the charging contacts.
4) Charge the handset battery pack for at least 15-20 hours
before using your new handset for the fi rst time.
DECT6035, 6035+1 OM.indb 19 DECT6035, 6035+1 OM.indb 19
Route the cord.
To AC outlet
AC adapter (supplied)
Caution: Use only the Uniden AAD-600S adapter.
19
To DC IN 9V
8/8/07 3:25:41 PM 8/8/07 3:25:41 PM