Wall Mounting The Base - Uniden 6035 + 1 Owner's Manual

Wall Mounting the Base

This phone can be mounted on any standard wall plate.
1) Snap the wall mount adapter into the notches on the base's back.
2) Plug the AC adapter into the DC IN 9V jack.
3) Plug the AC adapter into a standard 240V AC wall outlet.
4) Plug the telephone cord into the TEL LINE jack.
5) Route the telephone cord through the hole of the wall mount
adapter as shown.
6) Plug the telephone cord into the telephone wall jack.
7) Align the mounting slots on the base with the mounting posts on
the wall. Then push in and down until the phone is fi rmly seated.
Notes:
• To mount the phone directly on the wall, insert
two #10 screws (minimum length of 35 mm, not
supplied) into the wall, 100 mm apart; leave the
screw heads 3 mm away from the wall to allow
room for mounting the phone. Be sure the wall is
capable of supporting the weight of the phone, and
use the proper type of anchoring device for the
wall material. No need to route the telephone cord
through the hole of the wall mount adapter when
mounting directly on the wall.
DECT6035, 6035+1 OM.indb 16 DECT6035, 6035+1 OM.indb 16
AC adapter (supplied)
16
Route the cord.
Wall plate
AC outlet
8/8/07 3:25:41 PM 8/8/07 3:25:41 PM