Line Mode Setup (Base Only); Installing The Optional Headset - Uniden 6035 + 1 Owner's Manual

Line Mode Setup (Base only)

The Line Mode Setup feature is only used in instances where you have multiple phones where users may pick up an
extension while someone else is on the phone. Only in very rare instances where your phone system is not detecting
that an extension phone is picked up will you ever need to change this feature. There are three settings for this
feature: TYPE-A, TYPE-B, or OFF, but change this option only when instructed to by customer service. In most all
situations, this feature will never need to be used or modifi ed from the factory default setting of TYPE-A.
1) If you have multiple bases, select the base you need to change the setting (see page 21).
2) Press [Menu/Select]. Select the GLOBAL SETUP menu, and then the SET LINE MODE submenu.
3) IF INSTRUCTED BY CUSTOMER SERVICE PRESS
4) Move the cursor to select TYPE - A, TYPE - B, or OFF.
5) Press [Menu/Select]. You will hear a confi rmation tone.

Installing the Optional Headset

Your phone may be used with an optional headset. To use this feature, insert the headset plug into
the headset jack. Your phone is ready for hands-free conversations. (Headsets may be purchased
by calling the Uniden Parts Department. See inside the back cover page for contact information.)
DECT6035, 6035+1 OM.indb 37 DECT6035, 6035+1 OM.indb 37
[SELECT] appears. Press [Menu/Select].
37
8/8/07 3:25:45 PM 8/8/07 3:25:45 PM