Table of Contents
Advertisement
Wall Mounting the Base
You can mount your base directly to the wall using the horizontally
aligned mounting slots at the back of the base unit. Before doing this,
consider the following:
•
Avoid electrical cables, pipes, or other items behind the mounting
location that could cause a hazard when inserting screws into the
wall.
•
Mount your phone within distance of a working phone jack.
•
Make sure the wall material is capable of supporting the weight of the
base.
•
Use screws with anchoring devices suitable for the wall material
where the base will be placed.
1. Insert two mounting screws into the wall (with their appropriate
anchoring device), 65mm apart. Note the horizontal alignment of the
screw holes! Allow about 2mm between the wall and screwheads for
mounting the base.
2. Plug the AC adapter into the DC IN 9V jack on the telephone and then
into a Standard AC wall outlet.
3. Plug the telephone cord into the TEL LINE jack on the base and then
into the telephone socket on the wall.
4. Align the mounting slots on the base with the mounting posts on the
wall.
5. Then push in and down until the base is firmly seated.
28
Advertisement
Table of Contents
