Parameterizing The Physical Address Allocation In Udt - Siemens MOBY FC 56 Technical Description

Block Specifications
Assignment of the addresses in the FC 56
The unique I/O ASM addresses assigned by HW Config must also be used in the
parameter data block (UDT 10).
Start addresses of
UDT 10 in the data
view of the MOBY DB
Figure 2-4

Parameterizing the physical address allocation in UDT 10

In addition to the address (ASM_address), the MOBY channel (ASM_channel)
must also be assigned uniquely. When an ASM is used with several channels
(ASM 475), a separate UDT 10 must be defined for each channel. The entry
"ASM_address" remains the same. The "ASM_channel" is changed from 1 to 4.
2-8
Physical address allocation as
specified in HW Config
J31069-D0155-U001-A0-7618
FC 56