3
WORK
3.18
Checking throttle cable routing
(EXC-F US)
–
Plug in connector
–
Remove the wash cap set.
–
Thoroughly clean the plug-in connection of the fuel line using compressed air.
–
Lubricate the O-ring and connect plug-in connection
E00509-10
Finishing work
–
Mount the seat. (
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank. (
Main work
(EXC‑F EU/AU/BR, EXC‑F Six Days)
–
Check throttle cable routing.
Both throttle cables must be routed, side by side, on the back of the handle-
bars and above the fuel tank bracket, to the throttle valve body. Both throttle
cables must be secured behind the fuel tank contact area rubber band.
»
If the throttle cable routing is not as specified:
–
E00392-01
(EXC-F US)
–
Check throttle cable routing.
Both throttle cables must be routed, side by side, on the back of the handle-
bars and above the fuel tank bracket, to the throttle valve body. Both throttle
cables must be secured behind the fuel tank contact area rubber band.
»
If the throttle cable routing is not as specified:
–
E00502-01
for the fuel pump.
Info
Under no circumstances should dirt enter into the fuel line. Dirt in the
fuel line clogs the injection valve!
Info
Route the cable and fuel line at a safe distance from the exhaust sys-
tem.
p. 21)
p. 21)
p. 24)
Correct throttle cable routing.
Correct throttle cable routing.
27
for the fuel line.