Installing The Battery; Recharging The Battery - KTM 350 EXC-F 2017 Setup Instructions

3 WORK
3.14

Installing the battery

3.15

Recharging the battery

Warning
Risk of injury Batteries contain harmful substances.
–
Keep batteries out of the reach of children.
–
Keep sparks and open flames away from the batteries.
–
Only charge batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging batteries.
Minimum clearance
–
Do not charge deeply discharged batteries if charge is already below the minimum voltage.
Minimum voltage before the start of the charge
–
Dispose of batteries with less than the minimum voltage correctly.
Warning
Environmental hazard Batteries contain environmentally-hazardous materials.
–
Do not dispose of batteries as household waste.
–
Dispose of batteries at a collection point for used batteries.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with the applicable regu-
lations.
Main work
–
Insert the battery into the battery compartment with the terminals facing forward
and secure with holding bracket
(EXC‑F EU/AU, EXC‑F Six Days, EXC-F US)
Battery (HJTZ5S-FP)
(EXC‑F BR)
Battery (YTX5L-BS)
–
Mount and tighten screw
Guideline
Remaining screws, chassis
–
Connect positive cable
Guideline
Screw, battery terminal
–
Slide positive terminal cover
–
Connect negative cable
H00386-10
Guideline
Screw, battery terminal
Contact disks
the claws toward the battery terminal.
Finishing work
–
Mount the seat. (

.

.

to the battery.

over the positive terminal.

to the battery.

must be mounted under screws
p. 21)
1 m (3 ft)
9 V
M6 10 Nm (7.4 lbf ft)
M5 2.5 Nm
(1.84 lbf ft)
M5 2.5 Nm
(1.84 lbf ft)

and cable sockets
23

with