Brother NV4000D Service Manual page 80

Modules
25
Lever AB assembly removal
1. Remove the retaining ring (E2) on the rear of the unit holder from the lever
guide shaft 1.
2. Remove the screw 1, and then remove the lever supporter plate 2.
3. Pull out the lever guide shaft 1 from the unit holder.
4. Remove the lever AB assembly 3 from the lever guide shaft 1.
5. Remove the retaining ring (E2) from the lever guide shaft 1.
Start movie clip (CD-ROM version only)
26
Lever AB ASSY disassembly
1. Remove the 2 screws 1, and then remove the needle threader driving plate
1.
27
Shaft bushing A removal
1. Remove the screw 1, and then remove shaft bushing A 1 from the unit
holder.
2 - 58
Needle-presser module
1
Retaining ring E2
Retaining ring E2
1
3 1 2
1 1
1 1