Needle-Presser Module - Brother NV4000D Service Manual

Module
1
Presser dial gear attachment
1. Apply a light covering of MOLYKOTE EM-30L to the oscillating sections
of the presser foot rack 1 gear and the unit holder.
2. Insert the presser foot rack 1 into the unit holder 2.
3. Insert the presser dial gear 3 into the unit holder 2.
*Key point
• Align the mark (trough) 4 on the presser foot rack with the
mark (ridge) 5 on the presser dial gear.
4. Insert the presser dial shaft assembly 6 into the presser dial gear 3
through the shaft hole on the unit holder.
*Key point
• Align the D-cut face of the presser dial shaft assembly with the
D-cut face of the presser dial gear.
• Insert the presser dial shaft assembly until the hook of the
presser dial gear is caught in the groove on the presser dial
shaft assembly.
Apply MOLYKOTE EM-30L to the oscillating sections
of the presser foot rack gear and the unit holder.
Start movie clip (CD-ROM version only)

Needle-presser module

Light covering
1 2
3 1
5 4
6
6
3 - 105