Brother NV4000D Service Manual page 225

Module
37
Drop lever attachment
1. Insert the base plate 2 into the groove below the drop lever 1.
2. Position the drop lever 1 and the vertical lever 3 as shown in the
illustration on the right.
3. Attach a retaining ring (E2) to one end of the 2 slide shafts A 4.
4. Insert 2 slide shafts A 4 from the outside of the base plate, and attach the
retaining ring (E2) from the inside of the base plate.
5. Apply a small bead of MOLYKOTE EM-30L to the 2 oscillating sections
5 of the drop lever and slide shaft A.
Apply MOLYKOTE EM-30L to the 2 oscillating sections
of the drop lever and slide shaft A.
Start movie clip (CD-ROM version only)
Feed/rotary hook module
Small bead
2
3
1
Retaining ring E2
1
Retaining ring E2
4
5
3 - 93