Module
Side feed module
1
S pulse motor attachment
1
2
1. Attach the S pulse motor assembly 1 to the S pulse motor holder 2 with
the 2 screws 1.
*Key point
• Position the S pulse motor assembly so that the PCB is at the
upper right section.
2. Connect the lead wire connector to the PCB of the S pulse motor assembly.
3. Apply 1 or 2 drops of Turbine Oil #100 to the S pulse motor bushing.
Apply Turbine Oil #100 to the S pulse motor bushing.
1 - 2 drops
Screw, Bind
Torque
1
1
M3X4
·
0.78 – 1.18 N
m
Color; Silver
3 - 67