Brother NV4000D Service Manual page 26

Main unit
4
Needle plate B ASSY disassembly
1. Slide the slide button 1 to the right, and then remove the needle plate cover
2.
2. Reverse the needle plate B assembly 3. Press the tab 4 on the cutter cover
with your finger, and then remove the cutter cover 5.
3. Remove the spring plate 6 on the rear of the cutter cover, and then remove
the NT lower thread cutter 7.
4. Remove the slide button 1.
*Key point
• Remove the hooks (2 locations) on the rear of the slide button.
Start movie clip (CD-ROM version only)
5
Face plate assembly removal
1. Remove the screw 1 on the rear of the face plate assembly, and then
remove the face plate assembly 1.
2 - 4
Main parts
2
4
5
6 7
1
1
3
1
1