Brother NV4000D Service Manual page 222

Module
29
Feed dog attachment
1. Attach the feed dog 1 to the feed dog base with the 2 screws 1.
Start movie clip (CD-ROM version only)
1
30
Needle plate A assembly
1. Attach the stopper plate 1 to needle plate A 2 with the screw 1.
*Key point
• Engage the positioning tab on the stopper plate with the
positioning hole on needle plate A.
2. Attach the stopper plate 3 to the rear of needle plate A with the screw 1.
*Key point
• Engage the positioning tab on the stopper plate with the
positioning hole on needle plate A.
Start movie clip (CD-ROM version only)
1
31
Needle plate A attachment
1. Attach needle plate A 1 to the needle plate supporter shaft with the 2
screws 1.
*Key point
• Refer to "Feed dog height and squareness adjustment" on
page 4 - 22 for the adjustment procedure.
1
3 - 90
Feed/rotary hook module
Screw, Bind
M3X6
Color; Silver
Screw, Bind
M2.6X3
Color; Silver
Screw
M4
Color; Silver
Torque
·
0.78 – 1.18 N m
Torque
·
0.59 – 0.78 N m
Torque
·
1.18 – 1.57 N m
1
1
3 1
1 2
1
1